分离非极性和极性混合物时,一般选用极性固定液。此时,试样中极性组分先出峰,非极性组分

题型:判断题

问题:

分离非极性和极性混合物时,一般选用极性固定液。此时,试样中极性组分先出峰,非极性组分后出峰。( )

考点:职业技术鉴定职业鉴定基础知识气相色谱法
题型:判断题

增加泵的几何安装高度时,会在更小的流量下发生汽蚀。

题型:判断题

腹部胀满膨大,或状如蛙腹,按之如囊裹水,常伴下肢浮肿是()。

A.气鼓

B.水鼓

C.水肿

D.血鼓

E.积聚

题型:判断题

The great advance (91) rocket theory 40 years ago showed that liquid-fuel rockets were far (92) in every respect to the skyrocket with its weak solid fuel, the only kind of rocket then known. (93) , during the last decade, large solid-fuel rockets with (94) fuels about as powerful as liquid fuels have (95) their appearance, and it is a favorite layperson’s question to (96) which one is "better". The question is meaningless. (97) might as well ask whether a gasoline or a diesel engine is "better". It all (98) on the purpose. A liquid-fuel rocket is complicated, (99) has the advantage that it can be controlled beautifully. The burning of the rocket engine can be stopped completely; it can be reignited when (100) . (101) , the thrust can be made to vary by adjusting the speed of the fuel pumps. A solid-fuel rocket, on the other hand, is rather (102) in construction, (103) hard to build when a really (104) size is desired. But once you have a solid-fuel rocket, it is ready for action (105) very short notice. A liquid-fuel rocket has to be fueled first and cannot be (106) readiness for very long after it has been fueled. (107) , once a solid-fuel rocket has been ignited, it will keep burning. It cannot be stopped and reignited (108) desired (it could conceivably be stopped and reignited after a pre-calculated time of burning has elapsed, and its thrust cannot be varied. Because a solid-fuel rocket can be kept ready for a long time, most military missiles (109) solid fuels, but human-piloted spaceflight needs the fine adjustments that can (110) be provided by liquid fuels.

A.came with

B.showed

C.made

D.effected

题型:判断题

IT系统的配电线路中,当发生第一次接地故障时应由绝缘监视器发出音响或灯光信号,其动作电流应符合( )要求。

A.RAId>50V
B.RAId≤50V
C.RAId>80V
D.RAId≤80V
注:RA——外露可导电部分的接地电阻(Ω);Id——相线和外露可导电部分间第一次短路故障电流(A)。

题型:判断题

龙门剪床上剪刃之间的间隙S是根据被剪钢板的()而定。

更多题库